WE USE ACTINIC PAYMENTS FOR SECURE ONLINE ORDERING WITH THE HIGHEST LEVEL OF BANK APPROVED SECURITY (PCI DSS LEVEL 1) SM Services (UK) Ltd Telesales on 01234 751095
SM20 Glo Switch £16.95 Size: width 28 mm height 20 mm depth 45 mm Weight 20gms.
The OnBoard Glo Switch is designed to eliminate the problems of poor throttle response and cutting out from slow running. The switch is for use on two or four-stroke engines, single or twin cylinders. The switching point is adjustable across the throttle range and there is a built-in two second delay on switching off the glo. Servo reversing is fitted as standard and glo- on LED indicator. Connections are via high current screw block connectors. We recommend the SM97 battery for use with this unit. find out more | | SM29 Servo Reverser £11.95 Size: width 33 mm height 21 mm depth 14 mm Weight 10gms.
The Servo Reverser is an in-line unit designed to reverse the output rotation of a servo. Connections are via universal plug fly-lead to the receiver and pcb mounted connector to the servo. find out more | | SM787 JR Heavy Duty Slide Switch With Charge Socket (Spectrum Compatible) |
|
SM24 Servo Slow £17.95 Size: width 33 mm height 21 mm depth 14 mm Weight 10gms.
The Servo Slow unit is a micro computer controlled unit designed to slow the transit times of proportional servos. Common uses are mechanical retracts and flaps. The adjustment time is adjustable in eight steps up to approximately 25 seconds. Actual times will vary dependent upon the transmitter refresh rate. Connections are via universal plug fly-lead to the receiver and pcb mounted pin connector to the servo. Genuine retract servos will not be slowed by this unit. find out more | | SM97 Battery 3300mA hr 1.2v Sub C NMHI (Tagged) £3.95 Recommended battery for use with the Glo Switch. find out more | | SM86 Futaba Heavy Duty Slide Switch With Charge Socket |
|
SM34 Backer Monitor £13.95 Size: width 38 mm height 20 mm depth 67 mm weight 30gms.
The Backer Monitor is designed to allow two 5 Cell receiver batteries to be connected to one receiver. If either battery fails it will automatically be blocked from affecting the remaining functional battery. Each battery is separately monitored for safe operation and the current state is indicated by red and green LED indicators, the switching point is set at 5.95v + or - 50 mv. This unit will NOT work with standard 4.8v receiver packs. Connections are via screw block connectors.
find out more | | SM73 Futaba Type Switch Harness 3 Lead | | Landing Lights £19.95 The Landing light module is designed to simulate aircraft landing lights. Operation is controlled by the transmitter. The emitters are white extreme brightness emitters visible in daylight.. find out more |
|
SM213 Heavy Duty Locking Toggle Switch | | | | |
|
WE USE ACTINIC PAYMENTS FOR SECURE ONLINE ORDERING WITH THE HIGHEST LEVEL OF BANK APPROVED SECURITY (PCI DSS LEVEL 1) SM Services (UK) Ltd Telesales on 01234 751095